Our Services

Electrical Engineering

PE-stamped power distribution, medium-voltage and substation design, and arc-flash studies for Norristown's older Schuylkill-corridor mill and fabrication buildings, where mid-century service entrances and panels often need capacity upgrades to support new lines. We deliver one-lines, load and short-circuit calculations, NEC-compliant layouts, and arc-flash labeling that hold up to AHJ review across Montgomery County.

Controls & Automation Engineering

PLC/SCADA, HMI, UL 508A control panel design, and full systems integration on Allen-Bradley/Rockwell platforms for Norristown's metalworking, plastics, and packaging shops modernizing legacy relay logic and OEM equipment. We handle PLC migration, ISA-88 batch control, OEM machine integration, and startup and commissioning so retrofits land on existing production schedules.

Process Engineering

Process design, P&IDs, and mechanical and utilities engineering for Norristown food, beverage, and specialty-chemical processors expanding within tight existing footprints. From compressed air, steam, and water utilities to GAMP5 validation documentation for regulated lines, we scope process changes that fit Montgomery County's constrained urban industrial sites.

Not sure if your project is a fit?

Talk directly to an engineer about the facility issue, compliance gap, or upgrade you're evaluating.

☎ Call (484) 301-2042 ✉ Ask an Engineer

Industries We Serve near Norristown, PA

🍔 Food & Beverage 🥛 Dairy Processing 🍪 Snack & Bakery 🍖 Meat & Poultry 🐶 Pet Food 🌾 Agrifood 🛒 Consumer Products 🧴 Personal Care & Cosmetics 🧪 Chemical Processing 🧫 Specialty Chemicals 🔬 Life Sciences 💊 Nutraceuticals 💧 Water & Wastewater Treatment 📦 Warehousing & Distribution 📦 Packaging & Fulfillment

Why LAPORTE near Norristown, PA

Pennsylvania PE Licensing
LAPORTE engineers hold Professional Engineer licenses issued by the Pennsylvania State Registration Board for Professional Engineers. This allows LAPORTE to stamp and seal engineering drawings for projects throughout the Commonwealth, including Norristown and Montgomery County.
Local Office Proximity
LAPORTE's West Chester, PA office is approximately 30 miles from Norristown. This proximity allows for responsive site visits, construction support, and ongoing project coordination across Montgomery County and the surrounding region.
Montgomery County Manufacturing Base
Montgomery County is home to a significant concentration of pharmaceutical, biotech, and specialty chemical manufacturers. The county sits within the greater Philadelphia life sciences corridor, one of the largest clusters of FDA-regulated manufacturing facilities in the United States.
25+ Years Serving PA Manufacturers
LAPORTE has provided electrical, automation, and systems integration engineering services to regulated manufacturers in Pennsylvania for over 25 years. The firm's 90+ engineers understand the specific code requirements, utility coordination, and permitting processes common to projects in the region.
Regulated Industry Experience
LAPORTE's engineers are experienced in designing systems that meet FDA, USDA, EPA, and OSHA requirements. This background is directly applicable to the pharmaceutical, food and beverage, and chemical facilities operating in and around Norristown.

Your Engineering Team

Photo of Nate Kocher, P.E.
Nate Kocher, P.E.
Partner, Dir. Electrical & Automation Engineering
LAPORTE • West Chester, PA

Engineering and management consultant with 15+ years leading controls, power distribution, and systems integration projects for food, beverage, and pharmaceutical manufacturers. Experienced in FDA-regulated and GMP-compliant facilities across the U.S.

  • P.E. Licensed in 21 States
  • Penn State - B.S. Electrical Engineering
  • West Chester University - MBA
Connect on LinkedIn
Photo of Keith Morgart, P.E.
Keith Morgart, P.E.
Electrical and Automation Engineer
LAPORTE • Greater Pittsburgh, PA

Electrical power and controls design engineer with extensive experience leading projects for industrial and commercial clients. Specializes in power distribution, motor controls, and code compliance across manufacturing facilities.

  • P.E. Licensed Professional Engineer
  • Univ. of Pittsburgh-Johnstown - B.S. Electrical Engineering
  • NEC, NFPA & IEEE Standards Expert
Connect on LinkedIn

Representative Projects

pet food • multidiscipline
Challenge: A pet food manufacturer required engineering design for a new 370,000 sq ft greenfield production facility ($315M).
Solution: LAPORTE provided preliminary and detailed engineering for MEP, automation, instrumentation, and process. Scope included 45 HVAC units, ammonia refrigeration with micro-charging, air compressors, boilers, 40 MBTU cooling tower, chiller skids (2,300 TR), and wastewater treatment. Services included procurement, construction administration, startup, and commissioning with a team of 35.
Result: The greenfield facility was designed and constructed as a fully integrated production plant.
food & beverage • automation
Challenge: A nutrition company required engineering for a greenfield whey protein plant ($800M) including receiving, heat treatment, filtration, and drying systems.
Solution: LAPORTE provided project management, preliminary and detailed engineering design for process and automation, design of automation architecture (50+ control panels, networks, operator stations, control room), procurement support, and commissioning (IQ/OQ/PQ). Scope included HTST heat treatment, disc stack centrifuges, membrane filtration (UF/NF/RO), crystallization, evaporation, spray drying, and CIP.
Result: The greenfield whey protein plant was designed and commissioned.
pharmaceutical • multidiscipline
Challenge: A national research organization required a new Biologics Manufacturing Centre with biological containment level CL2 for vaccine candidate production (5,000 m², $126M).
Solution: LAPORTE provided engineering and construction supervision for the new facility including two cell culture suites (500L and 2,000L), purification by chromatography, vial filling, secondary packaging, warehouse, offices, mechanical/electrical rooms, and QC laboratory. The facility was designed in accordance with GMP requirements.
Result: The Biologics Manufacturing Centre was completed and designed for vaccine production.

Why LAPORTE

Multiple Fortune 500 clients with 100+ completed projects across food, pharmaceutical, and chemical manufacturing.
Client Track Record
PE-licensed engineers in 21 states delivering electrical, controls, and process engineering from concept through commissioning.
Engineering Depth

Frequently Asked Questions

Does LAPORTE have engineers licensed in Pennsylvania?
Yes. LAPORTE employs Professional Engineers licensed by the Pennsylvania State Registration Board. Our team can stamp and seal engineering deliverables for projects in Norristown and throughout the Commonwealth.
What industries does LAPORTE serve near Norristown?
LAPORTE serves pharmaceutical, biotech, food and beverage, chemical, and specialty manufacturing facilities. Montgomery County and the surrounding area have a strong concentration of these industries, and our engineering disciplines align directly with their needs.
How quickly can LAPORTE respond to projects in Norristown?
LAPORTE's West Chester office is roughly 30 miles from Norristown. Our engineers can be on-site the same day for urgent needs, and we regularly support projects across Montgomery County and the Philadelphia region.
What engineering services does LAPORTE provide?
LAPORTE provides consulting engineering for electrical power distribution, process controls, automation and instrumentation, systems integration, and MES/MIS. We handle projects from conceptual design through construction support and commissioning.
Does LAPORTE perform construction or installation work?
No. LAPORTE is a consulting engineering firm. We produce engineering designs, specifications, and drawings. We also provide construction administration and commissioning support, but we do not self-perform construction or installation.
Can LAPORTE support FDA-regulated facility projects?
Yes. A large portion of our work involves FDA-regulated manufacturing environments. Our engineers understand cGMP requirements, validation documentation, and the design standards expected by pharmaceutical and biotech manufacturers.
Does LAPORTE work with existing automation platforms already installed at my facility?
Yes. LAPORTE's automation engineers work across major automation platforms. We design around your installed base and can also evaluate options when new systems are required.

Engineering services in nearby areas

Local engineering support near Norristown, PA

Serving Norristown, PA from West Chester, PA
Suite 200, 158 West Gay Street
West Chester, PA 19382
Directions Reviews

Talk to an Engineer About Your Project

Share the facility issue, upgrade, or project scope you're evaluating. We'll route it to an engineer and let you know if it's a fit.