Our Services
Electrical Engineering
Power distribution, medium-voltage and substation design, and NFPA 70E arc-flash and short-circuit/coordination studies for Coatesville's plate-mill, metal-fabrication, and heavy-manufacturing facilities along the Route 30 corridor, where large connected loads and aging Chester County feeders demand verified protection. PE-licensed designs cover switchgear, motor control, lighting, and grounding for plant expansions and capacity upgrades.
Controls & Automation Engineering
PLC/SCADA, HMI, control-panel design, and systems integration on Allen-Bradley/Rockwell platforms for Coatesville-area fabrication shops, finishing lines, and food/consumer-goods producers modernizing legacy relay and standalone controls. We retrofit machinery, tie discrete cells into plant-wide supervisory systems, and document the panels and networks so your maintenance team can support them.
Process Engineering
Process design, P&IDs, and mechanical/utilities engineering for Coatesville and greater Chester County plants, from compressed air, steam, water, and material-handling utilities serving metalworking and fabrication to sanitary process and packaging systems for food and chemical manufacturers. Build-ready packages are coordinated with the electrical and controls scope so projects install once and run.
Not sure if your project is a fit?
Talk directly to an engineer about the facility issue, compliance gap, or upgrade you're evaluating.
☎ Call (484) 301-2042 ✉ Ask an EngineerIndustries We Serve near Coatesville, PA
🍔 Food & Beverage
🥛 Dairy Processing
🍪 Snack & Bakery
🍖 Meat & Poultry
🐶 Pet Food
🌾 Agrifood
🛒 Consumer Products
🧴 Personal Care & Cosmetics
🧪 Chemical Processing
🧫 Specialty Chemicals
🔬 Life Sciences
💊 Nutraceuticals
💧 Water & Wastewater Treatment
📦 Warehousing & Distribution
📦 Packaging & Fulfillment
Why LAPORTE near Coatesville, PA
Chester County Manufacturing Base
Chester County is home to more than 400 manufacturing establishments spanning pharmaceutical, food and beverage, specialty chemical, and advanced materials production. Coatesville and the surrounding Route 30 corridor host a concentration of process manufacturing facilities that require electrical and automation engineering support.
Pennsylvania PE Licensure
LAPORTE engineers hold active Professional Engineer licenses issued by the Pennsylvania State Registration Board for Professional Engineers, Land Surveyors, and Geologists. PA licensure allows LAPORTE to stamp and seal engineering drawings for projects across the commonwealth, including all Chester County municipalities.
15-Minute Drive from West Chester Office
LAPORTE's West Chester, PA office is approximately 15 miles from Coatesville along Route 30. This proximity allows engineers to be on-site at Coatesville area facilities quickly for field surveys, construction support, and commissioning activities.
Philadelphia Pharma and Life Sciences Corridor
Coatesville sits within the greater Philadelphia life sciences corridor, one of the largest pharmaceutical and biotech clusters in the United States. The region supports hundreds of FDA-regulated manufacturing sites producing active pharmaceutical ingredients, finished dosage forms, biologics, and medical devices.
Specialty Metals and Process Manufacturing Heritage
Coatesville has a long history in specialty metals and heavy process manufacturing. Facilities in and around the city operate high-demand electrical systems, process instrumentation, and industrial control networks that require ongoing engineering for upgrades, expansions, and regulatory compliance.
Your Engineering Team
Nate Kocher, P.E.
Partner, Dir. Electrical & Automation Engineering
LAPORTE • West Chester, PA
Engineering and management consultant with 15+ years leading controls, power distribution, and systems integration projects for food, beverage, and pharmaceutical manufacturers. Experienced in FDA-regulated and GMP-compliant facilities across the U.S.
- P.E. Licensed in 21 States
- Penn State - B.S. Electrical Engineering
- West Chester University - MBA
Keith Morgart, P.E.
Electrical and Automation Engineer
LAPORTE • Greater Pittsburgh, PA
Electrical power and controls design engineer with extensive experience leading projects for industrial and commercial clients. Specializes in power distribution, motor controls, and code compliance across manufacturing facilities.
- P.E. Licensed Professional Engineer
- Univ. of Pittsburgh-Johnstown - B.S. Electrical Engineering
- NEC, NFPA & IEEE Standards Expert
Representative Projects
pet food • multidiscipline
Challenge: A pet food manufacturer required engineering design for a new 370,000 sq ft greenfield production facility ($315M).
Solution: LAPORTE provided preliminary and detailed engineering for MEP, automation, instrumentation, and process. Scope included 45 HVAC units, ammonia refrigeration with micro-charging, air compressors, boilers, 40 MBTU cooling tower, chiller skids (2,300 TR), and wastewater treatment. Services included procurement, construction administration, startup, and commissioning with a team of 35.
Result: The greenfield facility was designed and constructed as a fully integrated production plant.
food & beverage • automation
Challenge: A nutrition company required engineering for a greenfield whey protein plant ($800M) including receiving, heat treatment, filtration, and drying systems.
Solution: LAPORTE provided project management, preliminary and detailed engineering design for process and automation, design of automation architecture (50+ control panels, networks, operator stations, control room), procurement support, and commissioning (IQ/OQ/PQ). Scope included HTST heat treatment, disc stack centrifuges, membrane filtration (UF/NF/RO), crystallization, evaporation, spray drying, and CIP.
Result: The greenfield whey protein plant was designed and commissioned.
pharmaceutical • multidiscipline
Challenge: A national research organization required a new Biologics Manufacturing Centre with biological containment level CL2 for vaccine candidate production (5,000 m², $126M).
Solution: LAPORTE provided engineering and construction supervision for the new facility including two cell culture suites (500L and 2,000L), purification by chromatography, vial filling, secondary packaging, warehouse, offices, mechanical/electrical rooms, and QC laboratory. The facility was designed in accordance with GMP requirements.
Result: The Biologics Manufacturing Centre was completed and designed for vaccine production.
Why LAPORTE
Multiple Fortune 500 clients with 100+ completed projects across food, pharmaceutical, and chemical manufacturing.
Client Track Record
PE-licensed engineers in 21 states delivering electrical, controls, and process engineering from concept through commissioning.
Engineering Depth
Frequently Asked Questions
Does LAPORTE have engineers licensed in Pennsylvania?
Yes. LAPORTE employs Professional Engineers licensed by the Pennsylvania State Registration Board. Our West Chester, PA office serves as a local base for projects throughout Chester County, including Coatesville and the surrounding municipalities.
What industries does LAPORTE serve near Coatesville, PA?
LAPORTE serves pharmaceutical, food and beverage, specialty chemical, biotech, and advanced manufacturing facilities in the Coatesville area. Our engineering disciplines, including electrical power distribution, process automation, and systems integration, apply to the regulated manufacturing operations common in Chester County.
How quickly can LAPORTE respond to projects in Coatesville?
LAPORTE's West Chester office is roughly 15 miles from Coatesville. Engineers can be on-site the same day for field surveys, troubleshooting, or project kickoff meetings. This proximity supports the fast response times that manufacturing facilities need during shutdowns, commissioning, and urgent equipment issues.
Can LAPORTE design electrical systems for FDA-regulated facilities in Coatesville?
Yes. LAPORTE has designed electrical power, instrumentation, and control systems for FDA-regulated manufacturing facilities for over 25 years. Our engineers understand cGMP requirements, cleanroom classifications, and the documentation standards that pharmaceutical and biotech manufacturers must maintain.
Does LAPORTE handle automation and controls engineering for Coatesville area plants?
LAPORTE provides automation and controls engineering including PLC and DCS programming, HMI/SCADA development, and systems integration. We work with major automation platforms and design control systems that meet the validation and traceability requirements of regulated manufacturing.
What size projects does LAPORTE typically handle?
LAPORTE handles projects ranging from single-room electrical upgrades to full facility automation overhauls. We support capital projects, maintenance turnarounds, and multi-phase expansion programs. Our 90+ engineers allow us to staff projects of varying scale without sacrificing response time.
Is LAPORTE a contractor or a consulting engineering firm?
LAPORTE is a consulting engineering firm. We produce engineering designs, specifications, and construction documents. We are not a contractor and do not self-perform construction work. This independence means our designs serve the facility owner's interests without conflicts tied to construction execution.
Engineering services in nearby areas
Local engineering support near Coatesville, PA
Serving Coatesville, PA from West Chester, PA
Suite 200, 158 West Gay Street
West Chester, PA 19382
West Chester, PA 19382
Talk to an Engineer About Your Project
Share the facility issue, upgrade, or project scope you're evaluating. We'll route it to an engineer and let you know if it's a fit.