Our Services

Electrical Engineering

Power distribution, medium-voltage, substation, and arc-flash/coordination studies for Malvern's Great Valley life-sciences and light-manufacturing facilities, where clean, reliable power and code-compliant infrastructure support sensitive lab, pilot-line, and production loads. PE-stamped one-lines, panel schedules, and load calcs delivered for both retrofit and new buildout in Chester County's corporate-center campuses.

Controls & Automation Engineering

PLC/SCADA, HMI, control-panel design, and systems integration on Allen-Bradley/Rockwell platforms, with ISA-88 batch structure and MES connectivity suited to Malvern's pharmaceutical, specialty-chemical, and precision-manufacturing operations along Route 202. We build validated, auditable control systems that integrate cleanly with existing plant floors and quality requirements.

Process Engineering

Process design, P&IDs, and mechanical/utilities engineering for the batch, packaging, and utility systems common to Malvern-area food, pharma, and chemical producers in the Great Valley Corporate Center. Practical, constructable designs that account for tight Chester County sites, existing utility tie-ins, and the architectural and structural coordination an active plant retrofit demands.

Not sure if your project is a fit?

Talk directly to an engineer about the facility issue, compliance gap, or upgrade you're evaluating.

☎ Call (484) 301-2042 ✉ Ask an Engineer

Industries We Serve near Malvern, PA

🍔 Food & Beverage 🥛 Dairy Processing 🍪 Snack & Bakery 🍖 Meat & Poultry 🐶 Pet Food 🌾 Agrifood 🛒 Consumer Products 🧴 Personal Care & Cosmetics 🧪 Chemical Processing 🧫 Specialty Chemicals 🔬 Life Sciences 💊 Nutraceuticals 💧 Water & Wastewater Treatment 📦 Warehousing & Distribution 📦 Packaging & Fulfillment

Why LAPORTE near Malvern, PA

Malvern Sits in Pennsylvania's Life Sciences Corridor
Malvern and the surrounding Chester County area are part of the greater Philadelphia life sciences corridor, home to hundreds of pharmaceutical, biotech, and specialty chemical manufacturers. This concentration of regulated manufacturing creates ongoing demand for electrical and automation engineering services.
Minutes from LAPORTE's West Chester Office
LAPORTE's West Chester, PA office is approximately 10 miles from Malvern. This proximity allows for rapid site visits, on-call support during commissioning, and direct collaboration with plant engineering teams throughout project execution.
Licensed Professional Engineers in Pennsylvania
LAPORTE employs Professional Engineers licensed in the Commonwealth of Pennsylvania, meeting the state's requirements for stamping and sealing electrical and control system engineering documents for industrial facilities.
Chester County's Manufacturing Base
Chester County supports a diverse base of food and beverage processors, pharmaceutical manufacturers, specialty chemical producers, and biotech operations. Many of these facilities operate under FDA, USDA, or EPA regulatory requirements that demand qualified engineering support for capital projects.
25+ Years Serving Regulated Industries
LAPORTE has spent more than 25 years delivering electrical, instrumentation, and automation engineering for facilities subject to cGMP, FDA, and other regulatory frameworks. That experience applies directly to the regulated manufacturers operating in and around Malvern.

Your Engineering Team

Photo of Nate Kocher, P.E.
Nate Kocher, P.E.
Partner, Dir. Electrical & Automation Engineering
LAPORTE • West Chester, PA

Engineering and management consultant with 15+ years leading controls, power distribution, and systems integration projects for food, beverage, and pharmaceutical manufacturers. Experienced in FDA-regulated and GMP-compliant facilities across the U.S.

  • P.E. Licensed in 21 States
  • Penn State - B.S. Electrical Engineering
  • West Chester University - MBA
Connect on LinkedIn
Photo of Keith Morgart, P.E.
Keith Morgart, P.E.
Electrical and Automation Engineer
LAPORTE • Greater Pittsburgh, PA

Electrical power and controls design engineer with extensive experience leading projects for industrial and commercial clients. Specializes in power distribution, motor controls, and code compliance across manufacturing facilities.

  • P.E. Licensed Professional Engineer
  • Univ. of Pittsburgh-Johnstown - B.S. Electrical Engineering
  • NEC, NFPA & IEEE Standards Expert
Connect on LinkedIn

Representative Projects

pet food • multidiscipline
Challenge: A pet food manufacturer required engineering design for a new 370,000 sq ft greenfield production facility ($315M).
Solution: LAPORTE provided preliminary and detailed engineering for MEP, automation, instrumentation, and process. Scope included 45 HVAC units, ammonia refrigeration with micro-charging, air compressors, boilers, 40 MBTU cooling tower, chiller skids (2,300 TR), and wastewater treatment. Services included procurement, construction administration, startup, and commissioning with a team of 35.
Result: The greenfield facility was designed and constructed as a fully integrated production plant.
food & beverage • automation
Challenge: A nutrition company required engineering for a greenfield whey protein plant ($800M) including receiving, heat treatment, filtration, and drying systems.
Solution: LAPORTE provided project management, preliminary and detailed engineering design for process and automation, design of automation architecture (50+ control panels, networks, operator stations, control room), procurement support, and commissioning (IQ/OQ/PQ). Scope included HTST heat treatment, disc stack centrifuges, membrane filtration (UF/NF/RO), crystallization, evaporation, spray drying, and CIP.
Result: The greenfield whey protein plant was designed and commissioned.
pharmaceutical • multidiscipline
Challenge: A national research organization required a new Biologics Manufacturing Centre with biological containment level CL2 for vaccine candidate production (5,000 m², $126M).
Solution: LAPORTE provided engineering and construction supervision for the new facility including two cell culture suites (500L and 2,000L), purification by chromatography, vial filling, secondary packaging, warehouse, offices, mechanical/electrical rooms, and QC laboratory. The facility was designed in accordance with GMP requirements.
Result: The Biologics Manufacturing Centre was completed and designed for vaccine production.

Why LAPORTE

Multiple Fortune 500 clients with 100+ completed projects across food, pharmaceutical, and chemical manufacturing.
Client Track Record
PE-licensed engineers in 21 states delivering electrical, controls, and process engineering from concept through commissioning.
Engineering Depth

Frequently Asked Questions

Does LAPORTE have engineers licensed in Pennsylvania?
Yes. LAPORTE employs Professional Engineers licensed in Pennsylvania who can stamp and seal engineering deliverables for projects in Malvern and throughout the state.
How close is LAPORTE to Malvern, PA?
LAPORTE's West Chester, PA office is about 10 miles from Malvern. Most project sites in the Malvern area are a short drive from our office, which supports responsive service and frequent on-site coordination.
What industries does LAPORTE serve near Malvern?
LAPORTE serves pharmaceutical, biotech, food and beverage, and specialty chemical manufacturers. The Malvern area and greater Chester County are home to many of these facility types, and our engineers have direct experience with the regulatory requirements each one faces.
Can LAPORTE support FDA-regulated manufacturing projects?
Yes. LAPORTE regularly delivers electrical and automation engineering for facilities operating under FDA cGMP requirements. Our deliverables are developed with validation and compliance documentation in mind from the start.
What types of engineering services does LAPORTE provide?
LAPORTE provides electrical power distribution design, instrumentation and controls engineering, PLC and HMI programming, systems integration, and control panel design for industrial and manufacturing facilities.
Does LAPORTE handle both new construction and retrofit projects?
Yes. LAPORTE supports greenfield facility builds, brownfield expansions, and equipment upgrades within existing plants. Many projects in the Malvern area involve modernizing legacy control systems or adding capacity to operating facilities.
Is LAPORTE a contractor or a consulting engineering firm?
LAPORTE is a consulting engineering firm. We produce engineering designs, specifications, and drawings that contractors then build from. We also provide construction support, commissioning assistance, and validation documentation.

Engineering services in nearby areas

Local engineering support near Malvern, PA

Serving Malvern, PA from West Chester, PA
Suite 200, 158 West Gay Street
West Chester, PA 19382
Directions Reviews

Talk to an Engineer About Your Project

Share the facility issue, upgrade, or project scope you're evaluating. We'll route it to an engineer and let you know if it's a fit.