Our Services
Electrical Engineering
Power distribution, arc-flash and short-circuit/coordination studies, substation and medium-voltage design for the mixed manufacturing, pharma, and specialty-chemical plants throughout Exton's Route 30 and Lionville/Eagleview business parks. PE-stamped designs that keep older Chester County facilities and new tenant fit-outs code-compliant and safe to maintain.
Controls & Automation Engineering
PLC/SCADA, HMI, ISA-88 batch logic, control-panel design, and full systems integration on Allen-Bradley/Rockwell platforms, plus MES connectivity for the contract manufacturers and processors common to the Exton corridor. We modernize legacy lines and integrate new equipment without ripping out the controls you already run.
Process Engineering
Process design, P&IDs, and mechanical/utilities engineering for the food & beverage, pharmaceutical, and chemical producers operating in and around Exton, PA. From utility sizing and piping to full process packages, our engineers scope systems that fit the constrained, multi-tenant footprints typical of Chester County industrial sites.
Not sure if your project is a fit?
Talk directly to an engineer about the facility issue, compliance gap, or upgrade you're evaluating.
☎ Call (484) 301-2042 ✉ Ask an EngineerIndustries We Serve near Exton, PA
🍔 Food & Beverage
🥛 Dairy Processing
🍪 Snack & Bakery
🍖 Meat & Poultry
🐶 Pet Food
🌾 Agrifood
🛒 Consumer Products
🧴 Personal Care & Cosmetics
🧪 Chemical Processing
🧫 Specialty Chemicals
🔬 Life Sciences
💊 Nutraceuticals
💧 Water & Wastewater Treatment
📦 Warehousing & Distribution
📦 Packaging & Fulfillment
Why LAPORTE near Exton, PA
Exton Sits in Pennsylvania's Life Sciences Corridor
Exton is located in Chester County along the Route 202 corridor, one of the densest concentrations of pharmaceutical and biotech companies in the United States. The greater Philadelphia region is home to more than 1,200 life sciences companies, and Chester County hosts a significant share of manufacturing and R&D facilities.
Pennsylvania PE-Licensed Engineers on Staff
LAPORTE employs Professional Engineers licensed in the Commonwealth of Pennsylvania. PA PE licensure is administered by the State Registration Board for Professional Engineers, Land Surveyors, and Geologists, and LAPORTE maintains active registrations to stamp and seal drawings for projects throughout the state.
Less Than 15 Minutes from LAPORTE's West Chester Office
LAPORTE's West Chester, PA office is approximately 10 miles south of Exton along Route 202. This proximity allows engineers to be on-site at Exton-area facilities within minutes for design coordination, field verification, and construction support.
Regulated Manufacturing Presence in the Exton Area
The Exton area supports a mix of pharmaceutical, specialty chemical, food and beverage, and biotech manufacturing operations. Several global manufacturers operate production and packaging facilities within Chester County, creating ongoing demand for electrical and automation engineering services.
Experience with FDA-Regulated and cGMP Facilities
LAPORTE engineers routinely design electrical power, instrumentation, and control systems for facilities subject to FDA, USDA, and EPA regulations. This includes cGMP manufacturing environments where documentation, validation, and compliance are integral to every engineering deliverable.
Your Engineering Team
Nate Kocher, P.E.
Partner, Dir. Electrical & Automation Engineering
LAPORTE • West Chester, PA
Engineering and management consultant with 15+ years leading controls, power distribution, and systems integration projects for food, beverage, and pharmaceutical manufacturers. Experienced in FDA-regulated and GMP-compliant facilities across the U.S.
- P.E. Licensed in 21 States
- Penn State - B.S. Electrical Engineering
- West Chester University - MBA
Keith Morgart, P.E.
Electrical and Automation Engineer
LAPORTE • Greater Pittsburgh, PA
Electrical power and controls design engineer with extensive experience leading projects for industrial and commercial clients. Specializes in power distribution, motor controls, and code compliance across manufacturing facilities.
- P.E. Licensed Professional Engineer
- Univ. of Pittsburgh-Johnstown - B.S. Electrical Engineering
- NEC, NFPA & IEEE Standards Expert
Representative Projects
pet food • multidiscipline
Challenge: A pet food manufacturer required engineering design for a new 370,000 sq ft greenfield production facility ($315M).
Solution: LAPORTE provided preliminary and detailed engineering for MEP, automation, instrumentation, and process. Scope included 45 HVAC units, ammonia refrigeration with micro-charging, air compressors, boilers, 40 MBTU cooling tower, chiller skids (2,300 TR), and wastewater treatment. Services included procurement, construction administration, startup, and commissioning with a team of 35.
Result: The greenfield facility was designed and constructed as a fully integrated production plant.
food & beverage • automation
Challenge: A nutrition company required engineering for a greenfield whey protein plant ($800M) including receiving, heat treatment, filtration, and drying systems.
Solution: LAPORTE provided project management, preliminary and detailed engineering design for process and automation, design of automation architecture (50+ control panels, networks, operator stations, control room), procurement support, and commissioning (IQ/OQ/PQ). Scope included HTST heat treatment, disc stack centrifuges, membrane filtration (UF/NF/RO), crystallization, evaporation, spray drying, and CIP.
Result: The greenfield whey protein plant was designed and commissioned.
pharmaceutical • multidiscipline
Challenge: A national research organization required a new Biologics Manufacturing Centre with biological containment level CL2 for vaccine candidate production (5,000 m², $126M).
Solution: LAPORTE provided engineering and construction supervision for the new facility including two cell culture suites (500L and 2,000L), purification by chromatography, vial filling, secondary packaging, warehouse, offices, mechanical/electrical rooms, and QC laboratory. The facility was designed in accordance with GMP requirements.
Result: The Biologics Manufacturing Centre was completed and designed for vaccine production.
Why LAPORTE
Multiple Fortune 500 clients with 100+ completed projects across food, pharmaceutical, and chemical manufacturing.
Client Track Record
PE-licensed engineers in 21 states delivering electrical, controls, and process engineering from concept through commissioning.
Engineering Depth
Frequently Asked Questions
Does LAPORTE have engineers licensed in Pennsylvania?
Yes. LAPORTE employs Professional Engineers holding active PE licenses issued by the Pennsylvania State Registration Board. Our West Chester office is staffed with licensed engineers who regularly execute projects throughout Chester County and the surrounding region.
How close is LAPORTE to Exton, PA?
LAPORTE's West Chester, PA office is roughly 10 miles from Exton along the Route 202 corridor. Drive time is typically under 15 minutes, which makes on-site visits, field surveys, and construction observation straightforward to schedule.
What types of manufacturing facilities does LAPORTE serve near Exton?
LAPORTE serves pharmaceutical, biotech, food and beverage, specialty chemical, and other regulated manufacturing facilities. The Chester County area hosts a concentration of these industries, and our engineers are experienced with the specific regulatory and operational requirements each one demands.
Can LAPORTE support FDA-regulated and cGMP projects in Exton?
Yes. LAPORTE has extensive experience designing electrical distribution, process controls, and automation systems for FDA-regulated and cGMP environments. Our deliverables are developed with validation and compliance requirements built in from the start.
What engineering disciplines does LAPORTE provide for Exton-area projects?
LAPORTE provides electrical power distribution design, instrumentation and controls engineering, automation and PLC/HMI programming, systems integration, and arc flash studies. We focus on the disciplines that keep manufacturing facilities running safely and in compliance.
Does LAPORTE handle both new construction and upgrades to existing facilities?
Yes. LAPORTE works on greenfield construction, facility expansions, equipment upgrades, and control system migrations. Many of our projects in the Exton area involve retrofitting or modernizing existing production lines while maintaining ongoing operations.
How does LAPORTE differ from an electrical contractor?
LAPORTE is a consulting engineering firm, not a contractor. We produce engineering designs, specifications, and construction documents. We also provide automation programming, systems integration, and commissioning support. We do not self-perform electrical installation work, which keeps our recommendations independent and in the owner's best interest.
Engineering services in nearby areas
Local engineering support near Exton, PA
Serving Exton, PA from West Chester, PA
Suite 200, 158 West Gay Street
West Chester, PA 19382
West Chester, PA 19382
Talk to an Engineer About Your Project
Share the facility issue, upgrade, or project scope you're evaluating. We'll route it to an engineer and let you know if it's a fit.